Dry Irish Stout Homebrew Recipe & Review

Posted on March 9, 2016 by Nick Ladd

Update: This beer was awarded 1st place in combined categories 14&15 at Homebrew Alley X.

One of the great session beers in the world, Irish Stout is often maligned as being thick, heavy, chewy, sweet, and high in alcohol. This is a really interesting phenomenon as I see the style as being quite the opposite. For me, it is a low-alcohol session beer that has quite a bit of interesting roast character and enough flaked barley to keep the mouthfeel from being too thin.

I’ve thought about this quite a bit and am convinced that that the root of the problem has to do with the fact that it is typically the adventurous choice made by the typical non-craft drinker. In comparison to a beer like Bud Light, I would certainly agree that it is the heavier option. More so, I think a lot of the misconception in regard to Irish Stout has to do with the fact that the beer is nearly black–something that many people psychologically associate with something being heavy.

The basis of this recipe is the heavily cited clone recipe for Guinness Stout. The main change I implemented was in the overall composition of the roasted malts. I’ve used English ale strains for this beer in the past, but have found that American Ale yeast works even better, providing a clean fermentation character while being more attenuative.

Dry Irish Stout Recipe

Specifications:
Size: 3.25 gal
Efficiency: 60%
Attenuation: 75%

Original Gravity: 1.046
Terminal Gravity: 1.012
Color: 37.31 SRM
Alcohol: 4.53% ABV
Bitterness: 41.7 IBU

Malt Bill:
5 lb (69.0%) Crisp Maris Otter
1.25 lb (17.2%) Barley Flaked
8 oz (6.9%) Crisp Roasted Barley
4 oz (3.4%) Crisp Chocolate
4 oz (3.4%) Briess Midnight Wheat

Mash Profile:
152°F – 60m

Water Treatment:
Extremely Soft NYC Water
Added to mash:
2g Gypsum (Calcium Sulfate)
5g Chalk (Calcium Carbonate)

Hopping:
36g East Kent Goldings (5.7% AA) – 60m

Kettle Additions:
0.5 ea Whirlfloc Tablets (Irish moss) – added during boil, boiled 15m
0.5 tsp Wyeast Nutrient – added during boil, boiled 10m

Yeast:
Wyeast 1056 American Ale – 1L Starter on Stir Plate

Tasting Notes:

Judged as a BJCP 13A. Dry Stout

Aroma (10/12):
Medium-low roast character that is dry and toasty while being reminiscent of coffee with a hint of bitter chocolate. Behind the roast are some nice bready and slightly toasty notes. No diacetyl, DMS, alcohol, or other off-aromas.

Appearance (2/3):
Just a shade lighter than black with some reddish ruby highlights. Clear. Great frothy foam with a beige head (white is typical to style).

Flavor (15/20):
Medium level of roast with lots of coffee notes and just a touch of acrid and burnt character. Very low levels of chocolate flavor. Malt is nice and toasty. Hop bitterness is medium-low with a very smooth character. No hop flavor. The finish is quite dry. Slightly acidic / tart twang on the finish.

Mouthfeel (4/5):
Low body with a full creamy mouthfeel. Dry. Just a touch of roasty astringency on the finish.

Overall Impression (7/10):
This is a really nice Irish stout. There is a touch of acidity from the roast which balances out the smooth mouthfeel provided by the flaked barley. Very sessionable and dry, but also intriguing with its nuanced roast character.

Excellent (38/50)

Rauchbier Recipe and Review

Posted on February 9, 2016 by Nick Ladd

Update: This beer was awarded 2nd place in combined categories 6&7 at Homebrew Alley X.

Rauchbier is probably one of the most polarizing styles of beer to brew and consume. I take great joy in serving it to friends and co-workers unfamiliar with the style as it tends to elicit a broad range of reactions. Perhaps 10-20% of the people I’ve served it to emphatically enjoy the beer; while the rest find it an interesting curiosity, but not something they’d likely come back to pint after pint. I don’t feel like there is much of a middle ground in terms of the enjoyment of rauchbier.

Luckily for me, I tend to enjoy the clean bacon-y smoke and neutral lager character exhibited by a good rauchbier. The first few sips are almost always unfailingly over-the-top, but this beer tends to grow on you as your palate adapts and becomes accustomed to the smokey malt. The key, however, is to not overdo the smoke—allowing it to be confidently present while finding a balancing element in the rest of the malt character. While not a beer with universal appeal, those willing to delve deeper into the style and find nuance beyond the smoke will be rewarded with a great imbibing experience. Whatever you do however, please don’t use peat-smoked malt in this beer. Peat has a place in scotch, but is pretty gross in a rauchbier.

Rauchbier Recipe

Specifications:
Size: 3.25 gal
Efficiency: 72%
Attenuation: 76%

Original Gravity: 1.056
Terminal Gravity: 1.013
Color: 13.73 SRM
Alcohol: 5.58% ABV
Bitterness: 23.0 IBUs

Malt Bill:
2.75 lb (36.7%) Weyermann Smoked Malt (Beechwood)
2 lb (26.7%) Weyermann Munich TYPE II
2 lb (26.7%) Weyermann Vienna Malt
8 oz (6.7%) Weyermann Caramunich® TYPE II
4 oz (3.3%) Weyermann Melanoidin Malt

Mash Profile:
144 °F – 30m
151 °F – 30m
170 °F – 5m

Water Treatment:
Extremely Soft NYC Water
2g Gypsum (to mash)
4g Calcium Chloride (to mash)

Hopping:
42g Hallertauer (2.7% AA) – 60 m

Kettle Additions:
0.5 ea Whirlfloc Tablets (Irish moss) – 15 m
0.5 tsp Wyeast Nutrient – 10 m

Yeast:
White Labs WLP833 German Bock Lager- Decanted 2L Starter on Stir Plate

Tasting Notes:

Judged as 2015 BJCP Category 6B. Rauchbier

Aroma (12/12):
For what it is, the beer actually has a fairly mellow smoke note on the nose that is reminiscent of bacon and perhaps smoked kielbasa. The smoke is clean and crisp. Beyond the smoke is a moderate caramel and toffee malt presence followed by abundant amounts of toasty bread crust. The malt provides a certain level of sweet aroma acting to mediate the upfront smoke. The fermentation character is amazingly clean with no alcohol or ester character.

Appearance (3/3):
Deep copper with great highlights somewhere in hue between a ruby and garnet. The beer is crystal clear and would appease even the most dogmatic German brewmaster. The beer is topped with a tan foam comprised of tight tiny bubbles with outstanding persistence.

Flavor (18/20):
A smokey, bacon-like flavor assertively holds the palate while managing to not dominate the entire beer. There are layers of malt flavor beyond the smoke with abundant toasty bread crust, hints of deep caramel, and touches of almost dark fruit or grape. There is a very low hop bitterness providing just a bit of a counterpoint to the touch of residual malt sweetness. Most of the balance in this beer is achieved through the contrast between smoke and residual malt sweetness. The beer showcases an exceptionally clean fermentation profile without even a hint of ester, alcohol, or residual diacetyl.

Mouthfeel (4/5):
Medium-bodied with a touch of creaminess on the finish. The carbonation is moderate and quenching. No astringency.

Overall Impression (8/10):
This is a great rauchbier that falls at the medium to low-end of the pack in terms of smoke intensity. The beechwood-smoked malt used in this beer exhibits a bacon or ham-like character that may not be for everyone, but is true to the style. I really enjoy how the smoke in a beer like this provides a balancing counterpoint to what otherwise is a fairly complex and rich malt character.

Outstanding (45/50)

Doppelbock Recipe and Review

Posted on January 13, 2016 by Nick Ladd

For me, the best Doppelbocks are pure expressions of German Munich malt. Providing a ton of flavor and richness through its high melanoidin content without bringing too much sweetness to a beer, Munich malt is a favorite of mine to brew with. Melanoidins are byproducts of Maillard reactions and differ in flavor from caramelization in that they lean more towards bready/biscuity/toasty as opposed to the caramel/toffee/burnt sugar exhibited by crystal malts. Varying amounts of Munich malt can bring different qualities to a beer. In small percentages, it enhances the overall malty impression of a base malt. When used in high percentages, such as in this beer, it provides an extremely rich toasty bread crust flavor.

Doppelbocks tend to be rich, highly-alcoholic beers that manage to not bog you down in the ways other high-alcohol beers can. This recipe is a work-in-progress as it continues to feel heavier than I would like. Future tweaks to the recipe will likely push the beer to attenuate better.

Doppelbock Recipe

Specifications:
Size: 3.25
Efficiency: 73%
Attenuation: 71.4%

Original Gravity: 1.084
Terminal Gravity: 1.024
Color: 22.23 SRM
Alcohol: 7.94% ABV
Bitterness: 25 IBU

Malt Bill:
8 lb (67.4%) Weyermann Munich II Malt
3 lb (25.3%) Weyermann Pilsner Malt
0.5 lb (4.2%) Weyermann Caramunich Type III
0.25 lb (2.1%) Weyermann Melanoidin Malt
2 oz. (1.1 %) Thomas Fawcett Chocolate Malt

Mash Profile:
146 °F – 25m
150 °F – 25m
154 °F – 20m
170 °F – 5m

Water Treatment:
Extremely Soft NYC Water
2g Gypsum (to mash)
4g Calcium Chloride (to mash)

Hopping:
1.5 oz Hallertau (2.7% AA) – 60 m
0.5 oz Hallertau (2.7% AA) – 5 m

Kettle Additions:
0.5 ea Whirlfloc Tablets (Irish moss) – 15 m
0.5 tsp Wyeast Nutrient – 10 m

Yeast:
Wyeast 2206 Bavarian Lager – Decanted 2L Starter on Stir Plate

Tasting Notes:

Judged as 2015 BJCP Category 9A. Doppelbock.

Aroma (12/12):
Liquid bread. Rich toasty bread crust dominates the aroma. The malt profile is very complex, possessing some slightly grape-like dark fruit aspects. There is a hint of a floral hop character that is somewhat surprising considering the low amount of finishing hops in the beer. Just a hint of toffee and caramel sits in the background. This beer exhibits a very clean ferment with no ester or alcohols apparent.

Appearance (3/3):
Deep brown with some garnet highlights. Crystal clear with a beautiful tightly-bound tan foam. Foam lasts for days. Perfect appearance.

Flavor (12/20):
This beer hits all the notes in terms of malt richness and complexity. Flavors of freshly baked bread crust dominate, but intermingle with some nice dark fruit components as well as a hint of toffee and perhaps just the faintest amount of dark cocoa. There is a bit of hot alcohol heat that hits the back of the throat. The beer has a considerable level of sweetness that reaches just beyond the range described in the style guideline. Hop bitterness is present, but more of a background balancing note.

Mouthfeel (2/5):
This is a full beer with a moderate level of carbonation. I wish the beer was a touch less full, which would enhance the quaffability of the beer.

Overall Impression (5/10):
This beer is so close to great. If I can get it to attenuate perhaps another 4-6 gravity points, it would be right up there with world-class examples. The sweetness is manageable, but makes it drink closer to a melanoidin-heavy barleywine rather than a true doppelbock.

Very Good (34/50)

Mixed-Culture Saison Recipe and Review

Posted on January 7, 2016 by Nick Ladd

It seems that more and more breweries are beginning to incorporate Brettanomyces into their brewing repertoire. When done well, I’m a huge fan. By and large, my favorites are those that focus on creating a pleasant and complex fruity character rather than a horsey, phenol-heavy Brett character typically produced by many strains. I’m not a huge fan of that type of aggressive phenolic Brett character, which I find to be at times overly harsh and perhaps even biting. I think this is one of the biggest mistakes being made by contemporary brewers trying to make funky beers. Bigger Brett character is not always better.

The key to this beer recipe is the oats which provide a nice silky component to what could otherwise be a very dry, thin beer. Even more important is achieving proper fermentation character. In my brewery, I am achieving this by utilizing a mixed culture which I’ve been propagating over a number of generations. The culture is composed primary of fruit-heavy Brett and Sacc strains, as well as a touch of Lactobacillus, which is kept in check through the IBUs in the beer.

Mixed Culture Saison Recipe

Specifications:
Size: 3.25
Efficiency: 68%
Attenuation: 96%

Original Gravity: 1.052
Terminal Gravity: 1.002
Color: 5.54 SRM
Alcohol: 6.57% ABV
Bitterness: 12.8 IBU

Malt Bill:
5 lb (69.0%) Weyermann Pilsner Malt
.75 lb (10.3%) Briess Flaked Oats
.75 lb (10.3%) Weyermann Pale Wheat Malt
.75 lb (10.3%) Weyermann Munich TYPE I

Mash Profile:
144 °F – 50m
154 °F – 15m
170 °F – 5m

Water Treatment:
Extremely Soft NYC Water
2g Gypsum (to mash)
2g Calcium Chloride (to mash)

Hopping:
6g Centennial (10.5% AA) – 90 m

Kettle Additions:
0.5 ea Whirlfloc Tablets (Irish moss) – 15 m
0.5 tsp Wyeast Nutrient – 10 m

Yeast:
1L Starter of my house saison culture. The mixed culture is made up of cultured Saison Dupont dregs, The Yeast Bay’s Amalgamation Brett Blend, and White Labs Lactobacillus Brevis.

Tasting Notes:

Judged as 2015 BJCP Category 28A. Brett Beer.

Aroma (10/12):
This is a very fruity expression of Brettanomyces. The beer’s fermentation character dominates the aroma, imbuing the beer with impressions of ripe fruit — cherry, honeydew, and even some tropical pineapple. A very light phenolic pepperiness is in the background with only the faintest hint of rubber. The malt character is very minimal and clean. There is a light tartness on the nose and just a hint of acetic sharpness. As the beer warms, some hot alcohol comes out which detracts slightly.

Appearance (1/3):
Beautiful deep gold with brilliant clarity. A large fluffy white head forms, but quickly dissipates — likely attributable to the Lactobacillus in the mixed culture.

Flavor (17/20):
The overall flavor is really clean considering that this is a mixed-fermentation beer. There is a touch of a leatherlike earthiness from the Brett, but most of the fermentation character is bright and fruity. The malt is really crisp and nice — like a good German pilsner. The beer is about six months old at this point and only has a hint of the Cheerio character it had exhibited only a couple months ago — something I attributed to THP from the Brettanomyces ferment. There is a touch of acidity to the beer that is quite pleasant — not something I’d consider ‘sour’, but more of a complementary note to the fruitiness.

Mouthfeel (5/5):
The beer is very dry, but there is a bit of roundness to the body that prevents it from being too austere. There is a nice mellow acidity that combines with a relatively high carbonation to give a bright clean finish to the beer.

Overall Impression (8/10):
I am really happy to see how my house saison culture is expressing itself in the beers fermented with it. The Brettanomyces personality of this beer is much more in-line with ripe fruit than the earthy funk that can sometimes dominate Brett beers.

Excellent (41/50)

Sierra Nevada Pale Ale Clone – 2.0

Posted on September 23, 2015 by Nick Ladd

Another blog post, another Sierra Nevada Pale Ale clone. The Verdict: Not Cloned.

Commercial beer on the left, homebrew on the right.

That said, we’re getting close.To start, here is the recipe that I brewed.

Sierra Nevada Pale Ale Cone 2.0 (Not Cloned)

Specifications:

Size: 3.25 gal
Efficiency: 68%
Attenuation: 80% (measured)

Original Gravity: 1.051
Terminal Gravity: 1.010 (measured)
Color: 10.86 SRM
Alcohol: 5.4% ABV (calculated)
Bitterness: 37.7 IBU (calculated)

Grist:

6.75 lb (94.7%) Briess 2-Row Brewers Malt
6 oz (5.3%) Briess Caramel 60L

Mash Regiment:

152 °F – Sacc Rest – 60min

Water Treatment:

Extremely Soft NYC Water
4g Gypsum (to mash)
2g Calcium Chloride (to mash)

Hopping:

9 g Magnum (12.6% AA) – 60 m
8 g Perle (8.7% AA) – 30 m
8 g Cascade (6.9% AA) – 10 m
72 g Cascade (6.9% AA) – Whirlpool 15m

Kettle Additions:

0.5 ea Whirlfloc Tablets (Irish moss) – 15 m
0.5 tsp Wyeast Nutrient – 10 mYeast:

Yeast:

WYeast 1056 American Ale™ Starter on stirplate to achieve 1 million cells per milliliter of wort per degree Plato. Use Mr. Malty to determine proper starter sized based on age of yeast package. Pitch into 60°F wort and allow to free rise to 64°F. As fermentation begins to slow, raise temperature to 70°F.

The Results

While there are some recipe changes in store for the next iteration, this beer primarily misses the mark on technical merits. Most noticeably my beer has a touch of honeyed oxidized malt character with perhaps a faint hint of diacetyl that is not present in the commercial beer.

I am typically very careful to limit O2 exposure, especially in fermented beer. In some ways, the oxidation of this beer is welcome as it is making me look critically at my process and think of ways I can limit O2 pickup. The biggest risk for oxidation in my process comes at two locations: the cold crash and packaging.

When I cold crash my beer, there is usually some suck-back of air into the fermenter due to a vacuum being pulled as the liquid’s volume decreases as it cools. I typically put a little CO2 head pressure on my beers as I cold crash in order to prevent this. With this beer, I got lazy and skipped this step. Nevermore!

The second biggest opportunity for O2 pickup is when I rack finished beer to my keg. I always purge the keg, but perhaps I am not always as careful as I should be in gently racking the beer and purging the racking cane or fermenter head space once it is opened up. In a perfect world, I would be doing a completely closed transfer — this is something I’m looking into and hope to implement in the future.

In terms of recipe, I believe the malt bill I am using is nearly perfect. There is a slight color difference between my beer and the commercial example, but I believe this has more to do with some yeast being suspended in the homebrew, and not a dramatic miss with the malt bill. I may bump up the crystal malt ever so slightly in the next round — perhaps only by a couple ounces.

The biggest recipe difference that I need to implement for the next round is in regard to flavor and aroma hops. The commercial beer has a substantial grapefruit pith and slightly spicy / herbal hop character. While this character is present in the homebrew, it is not nearly as intense. The homebrew’s bitterness level is spot on, but the aroma and flavor needs to be dramatically increased. For the next iteration of my recipe, I intend to boost the amount of late hopping at least by an order of 2 or 3 in order to get closer to the commercial beer.