Session Ale – Thoughts, Recipe, and Review

The original brewdog Zeus pondering the sessionabilty of my beer.

The original brewdog Zeus pondering the sessionabilty of my beer.

There is a lot of debate in the beer world about what exactly defines a true session beer. Alcohol levels typically weigh heavily in the debate. Alcohol is a quantifiable variable with very specific implications, especially as it relates to the length of a drinking session. The specifics off what ABV is truly considered ‘sessionable’ makes for a fun debate, but is one that I’ll defer to the experts. For the Brits, frequent pub visits are an important part of daily life and culture. Taking queue from the ordinary bitters that frequently flow in pubs across the Isles, I’d suggest that a true session beer should be kept somewhere in the range of 3.0-3.5% ABV. Whether these levels were consciously set, or simply a by-product of the taxes imposed upon beer, the effect is clear. This level of alcohol strikes a good balance between the pleasant alcohol induced euphoria beer can produce (AKA a buzz)  and running the risk of prematurely ending a drinking session in a drunken stupor. Until a couple of years ago, it was difficult to find a beer this low in alcohol at American brewpubs. Luckily, a trend towards more moderate alcohol levels has taken root, and homebrewers are able to find numerous wonderful examples of commercial session beers.

Aside from alcohol content, there are other very important factors which improve a beer’s sessionability. To me, session beers should be relatively dry in order to prevent too much fullness. That said, low-gravity beers can easily become watery or tea-like if the gravity drops too low. There is a hugely important distinction that must be understood when formulating a session beer, and that is the difference between sweetness and body. A beer can be round with a medium body and moderate amount of residual gravity without tasting sweet. The key is making sure that all fermentable sugars have been consumed by the yeast and that the gravity that remains are dextrins which provide ample body without perceivable sweetness. Balance is the key.

Another important factor in sessionablity is flavor and complexity. Session beers should be complex enough to remain interesting, while not overburdening your palate. The Brits do this well with the bready malt components and nuanced yeast character found in their bitters. Personally for me, the same end result can be accomplished using hops. There is something amazing about drinking a beer with the balance and hop intensity of some of the bigger more intense American Pale ales while doing so at a more moderate ABV.

Single Hop Huell Melon Session Pale Ale

Recipe Specs:
Size: 3.23 gal
Efficiency: 68%
Attenuation: 64%

Original Gravity: 1.043
Terminal Gravity: 1.015
Color: 8.25 SRM
Alcohol: 3.53% ABV
Bitterness: 39.5 IBUs
Mash Temp: 159 °F

Grain Bill:
4.75 lb (79.2%) Weyermann Pilsner Malt
.25 lb (4.2%) Briess Victory® Malt
.25 lb (4.2%) Weyermann Pale Wheat Malt
.5 lb (8.3%) Weyermann Carahell®
.25 lb (4.2%) Weyermann Carared®

0.75 oz Huell Melon (5.2% AA) – 60 m
1 oz Huell Melon (5.2% AA) – 20 m

3 oz Huell Melon – 180 degree hop stand (5.2% AA) – 20 m

2 oz Huell Melon (5.2% AA) – Dry Hop 3 Days

Kettle Additions:
0.5 ea Whirlfloc Tablets (Irish moss) – 15 m
0.5 tsp Wyeast Nutrient – 10 m

WYeast 1056 American Ale™ – Build appropriately sized starter
Pitch yeast once beer is at 62°F. Keep beer at 64°F during the start and peak of fermentation. Slowly raise to 70°F as signs of fermentation taper off.

Water Treatment:
Soft NYC municipal water with 2g Gypsum and 4g Calcium Chloride added to the mash.

Tasting Notes:

Judged as a BJCP Category 23 Specialty Beer

Aroma (7/12):
While not as much melon as I had anticipated given the hop’s name, there is a nice round fruity hoppy character on the nose. The fruitiness is somewhat non-descript, although it is definitely not the typical citrus found in American hops. If I really search, I can convince myself there is some honeydew-like melon aromas, but it is a stretch. The hops have a touch of grassiness which isn’t offensive. The malt is really nice. It is soft with a hint of sweetness complemented by biscuit and sourdough bread.

Appearance (2/3):
The beer is a rich golden color bordering on copper with a touch of haze. The glass is capped with a white, fluffy, persistent head.

Flavor (17/20):
The hops are much more subdued in the flavor than the aroma. The malt is wonderful. Lots of toast and biscuit. The bitterness is firm and balancing, while being quite clean. The beer goes through a great procession on the palate with malt up front, then some juicy hops, and ending with a toasty malt finish.

Mouthfeel (5/5):
Beer is medium to medium-low bodied. The mouthfeel exceeds what I would have expected given the low starting gravity. Soft carbonation enhances this impression. No perceptible alcohol heat.

Overall Impression (10/10):
This is a really crushable session beer that exceeds my expectations. The new German hop variety used is pretty tame, and much more nuanced than other varieties being grown in the New World. All in all, the beer hits all the right chords in terms of what I search for in a session beer. Wonderful beer.

Excellent (41/50)

Vienna Lager Homebrew Review

Vienna Lager HomebrewIt’s been about six weeks since I’ve brewed my Vienna Lager — prime time to review this brew. This is the third or fourth time I’ve brewed a Vienna Lager, and I’m always excited when the time comes to tap a fresh keg. The recipe is primarily a blend of Munich, Pilsner, and Vienna malts. The goal is to create a clean and crisp malt-forward lager, while imbuing enough character to remain interesting. Getting the beer to finish relatively dry and low in alcohol helps to make this a great session beer. This beer is similar to what a beer like Negra Modelo or Dos Equis Amber could be if they were all-malt beers.

Fermentation went nearly perfectly with the beer starting at 1.052 and ending at 1.014 — approximately 73% apparent attenuation. The beer has been lagering at 32°F for the past 4 weeks and is ready for a taste.

Tasting Notes:

Judged as a BJCP Category 3A Vienna Lager

Aroma: (10/12)
The aroma is somewhat subdued, and very clean. There is a really nice round bready malt component that is very inviting and reminiscent of freshly baked bread. Intertwined are aromas of toasted biscuit and crusty sourdough. The is a light hint of sweetness that reminds me of golden colored caramel and provides a slight impression of sweetness.

Appearance: (2/3)
Rich amber with ruby red hues. The beer is clear, with just a hint of haze that should clear with a little more lagering time. The head is bright white, sticky, and persistent.

Flavor: (18/20)
The flavor is all about the interplay between toasty, dry, melonoiden-rich malt that finishes with a light touch of residual malt sweetness. There is no hop flavor that I can detect, but the bitterness is firm and clean, helping to keep the beer very balanced. To better fit the style, the beer could be a hair less bitter, otherwise it is nearly spot-on to style.

Mouth Feel: (4/5)
Medium-low bodied with a crisp and clean finish. There is a miniscule touch of astringency on the finish that provides further drying and slightly pushes it out of style.

Overall Impression: (8/10)
This is a beautiful beer to look at and consume. The balance is to the malt side, but it does so with a deft hand keeping it crisp, refreshing, and delicious. I will certainly be making this delicious recipe again.

Score: 43 / 50 (Excellent)